Re: Lower cowl patch panel info
I did it on my 29 Tudor.
IIRC, used a spot weld cutter to cut out some welds, then used the patch as a guide to cut. there was some bracing behind it which I cleaned up and treated(didn't snap a photo). Then fit the patch panel and cleco'ed it in to TIG weld the seam. I'm not a professional but took me about a day.
Once the seam was sanded, a skim coat of body filler primed and blocked it came out invisible
__________________
1929 Tudor
Last edited by krzewinskibe; 04-16-2018 at 05:56 PM.
|