Quote:
Originally Posted by wrndln
After looking up B 40 fan belts on eBay, it appears the belt is 43" in diameter. It is strange the B 40 would be 43", verses 40" like the name. Is the correct belt 43"?
Rusty Nelson
|
That sounds weird! One time, when I was too far from another supply, I used a B43 to get me out of trouble. It was as close as I could get. To tension it, the generator was so far out to the left that the belt touched the rubber part lower water outlet near the radiator. I laid a piece of aluminium under the hose clip to prevent it wearing through and replaced the belt some 4,000 miles later.