Re: Number 8 Exhaust Valve sticking
Because the broken stud must be removed without causing damage to the cast iron threads in the block
. The valve guide is held in place by the valve spring .
With the valve spring removed , the guide is easier for me to remove than a broken stud .
.Sometimes the head has to be removed , no matter what .
I just try to avoid removing the head unless it is absolutely necessary .
I'm not trying to be a smartazz .
I have seen that Railcaarmover knows his stuff .
This is just my preferred method and why .
Last edited by Purdy Swoft; 10-26-2019 at 01:13 PM.
|