Sponsored Links (Register now to hide all advertisements)
Ya done good there, Kirk! Hope you realize I wuz jerkin' your chain.
OK, those two zerk fittings that you're trying to pump MORE grease into.........FORGET that they exist! That was such a bad idea that Ford finally quit putting them there. Pack those two hub bearings by hand, the old-fashioned way. Throw a little extra grease in the hub cavity if it makes ya feel good. If you pump grease into those zerks, it can go any direction it wants. It can fill the axle bells, and it can certainly fill your new brake shoes, etc. with grease. Good 'n snug on the torque for those bolts. Go back around the banjo bolts several times 'til they don't want to tighten (reasonably) any more. Do the safety-wire thing on the torque tube bolts. You're almost there! DD