Thread: 1951 Ford
View Single Post
Old 12-04-2012, 03:51 PM   #4
Senior Member
jdl's Avatar
Join Date: May 2010
Location: California Central Coast
Posts: 931
Send a message via ICQ to jdl
Default Re: 1951 Ford

Originally Posted by Big Red 51 View Post
The switch screws into front of brake master cylinder, under the hood. Most likely cause. Can get one at NAPA or others. If not cause, check the wiring on the switch and make sure plugged in good or open wire.
Good Luck, Don H
The master cyl on 51 fords is under the car next to the frame. they relocated it to under the hood in 1952 and up.
jdl is offline   Reply With Quote