View Single Post
Old 07-02-2020, 11:09 AM   #9
Senior Member
dmsfrr's Avatar
Join Date: Aug 2012
Location: Abq, NM
Posts: 2,477
Default Re: 1956 272 flywheel

Originally Posted by Daves55Sedan View Post
. . . I could measure the O.D. if someone else had a V8 flywheel laying around that they could measure.
I went out to the garage to measure the OD of the flywheel I've got for a '57 312 but forgot it's still on the engine... at the machine shop.
If it helps, I did measure the diameter of the clutch disc, 11 inches.
Photo, pressure plate bolt spacing. 12 inches
Attached Images
File Type: jpg pressure plate c.jpg (86.7 KB, 15 views)

Last edited by dmsfrr; 07-02-2020 at 12:11 PM. Reason: add photo
dmsfrr is offline   Reply With Quote