Thread: Rear Main
View Single Post
Old 06-14-2020, 11:04 AM   #4
Ole Don
Senior Member
 
Ole Don's Avatar
 
Join Date: May 2010
Location: St. Michael, Minnesota
Posts: 1,599
Default Re: Rear Main

I use a 3/8 drive 3/8 12 point deep socket. On reassembly, I use a dab of sealer on the threads because they go in to where oil lives. I also use a dab of sealer on the very end of the seal holder, and the very ends of the parts that press in the grooves.
Ole Don is offline   Reply With Quote