Thread: General Info
View Single Post
Old 06-08-2020, 08:08 AM   #13
raceron1120
Senior Member
 
raceron1120's Avatar
 
Join Date: May 2010
Location: Ellsworth Michigan
Posts: 1,807
Default Re: General Info

The FL300 oil filter should work - just be sure to check the gasket to flange for proper seating. the 300 is a short filter, the FL1A is the most common one used, it's longer. Also check the FL299, it was/is used on bigger engines but if old my memory serves correctly, I am pretty sure it has the same mounting and sealing surface as the FL1A and FL300. Clearance is to be considered to make sure there's room for whichever filter is used. I sold hundreds of those filters back in my days as a Ford parts guy. I use FL1A on my '56 292.
raceron1120 is offline   Reply With Quote