Thread: Shift tower
View Single Post
Old 02-01-2020, 04:56 PM   #3
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 2,402
Default Re: Shift tower

evapo rust, or rust 911 (cheaper) are a good idea for sure. the lever on the handle is just the reverse lock out, only used to get into reverse. if you can pop the covers off the cover at the ends of the shift rail you can then get on the ends of the shaft with a brass rod and get a good direct hit to the rails. be careful squeezing the cover in a vise, i cracked one i was fighting with once.
cas3 is offline   Reply With Quote