Quote:
Originally Posted by Jwilli
My passenger door has a gap of about 1/2 inch at the bottom. Is the quarter panel adjustable to reduce this gap?
|
Not really. If the driver’s side is lined up, the only way to pull that bottom of the passenger’s door is to run a double strand of wire from the top front of that door to the bottom rear corner. Then take a screwdriver and twist that wire so it shortens. You can tighten that wire until the door lines up and put something flat in that loop so the wire doesn’t twist back out. Your door panel covers all this and none will be the wiser as long as you use something flat to hold the wire in place.
Good luck,
Mike