View Single Post
Old 02-07-2011, 01:10 PM   #10
Steve_S
Member
 
Steve_S's Avatar
 
Join Date: May 2010
Location: So Cal
Posts: 84
Default Re: Fuel pump oddity

Thanks guys, first please note that in the photo above the pump is sitting flush because the camshaft lobe is down. When up, the fuel pump comes WAY up, probably 1/2". I just didn't take a photo of that when i had a chance.

- The engine is back together and nearly ready to run, so the camshaft is in position.
- The rod is a shade over 10" long.
- The fuel pump has not been rebuilt yet.

Also, I did make sure the rod would fit into the cup in the fuel pump, and the spring is not terribly strong so no problems overcoming it.
Steve_S is offline   Reply With Quote