The Ford Barn - View Single Post

GregJac · 01-03-2021, 03:28 PM

The carb was purchased from Gaslight and rebuilt by Charlie Armstrong, in Kentucky.
moving the gas adjusting needle has little effect and the idle air screw does nothing. Screw in all the way in and no change.
Float level checks at 5/8" and fuel shut-off valve has been replaced. I also replaced the float valve with a Viton tipped one.

01-03-2021, 03:28 PM	#5
GregJac Junior Member Join Date: Jun 2020 Posts: 13	Re: 30 Coupe running too rich The carb was purchased from Gaslight and rebuilt by Charlie Armstrong, in Kentucky. moving the gas adjusting needle has little effect and the idle air screw does nothing. Screw in all the way in and no change. Float level checks at 5/8" and fuel shut-off valve has been replaced. I also replaced the float valve with a Viton tipped one.