View Single Post
Old 01-13-2020, 03:58 PM   #5
DocJohn
Member
 
Join Date: Dec 2013
Location: Derbyshire, UK
Posts: 68
Default Re: Simple DIY distributor/ignition bench tester

Funnily enough i've been looking into this very thing recently! There's virtually no chance of getting a proper Sun or King tester over here in the UK. I reckon that you could start with something like a pillar drill and a suitable arrangements of clamps and drive dogs. Then you could easily set the points with a cheap dwell meter. Single channel oscilloscopes are £15 so you might get somewhere adding that. It wouldn't do everything but it would be a start.
DocJohn is offline   Reply With Quote