The Ford Barn - View Single Post

PeteVS · 06-30-2020, 05:48 PM

I'm working on my A project and I picked up a can of Metal To Metal to fill in some of the rust pebbling on the A frame. My attention was drawn to what I assume to be the front fender brace holes. They're UGLY! I don't want to drag out the welder and probably make a mess of things but do you think if I countersink the holes and fill them with the filler I'd be OK?
Thanks!!

06-30-2020, 05:48 PM	#1
PeteVS Senior Member Join Date: May 2010 Location: FP, NJ Posts: 2,770	Plugging holes with "Metal To Metal?" I'm working on my A project and I picked up a can of Metal To Metal to fill in some of the rust pebbling on the A frame. My attention was drawn to what I assume to be the front fender brace holes. They're UGLY! I don't want to drag out the welder and probably make a mess of things but do you think if I countersink the holes and fill them with the filler I'd be OK? Thanks!! __________________ Don't never get rid of nuthin!