Quote:
Originally Posted by Jembow
If you look at the power curves on the Van Pelt site you'll see the 85 curve drop off at 3800, while the 60 is still going up at 4000. V8-60 midgets would pull up to 7500. It's a motor that wants to rev.
|
Thats kinda why i asked, it would take a very very very special helmet distributor to run anywhere close to 7500 rpm.
And that was the discussion regarding a helmet distributor for a 60. There is no difference in a 60 helmet from the other helmets........same point set and same cam advance etc......