Re: Pulling flathead away from Trans
well, my brain must be on the floor too, thinking some more got the brain past the bad syncro and in to gear, if you are trying to pull the trans, that means you have the drive line disconnected, or maybe even have the motor and trans out, whatever, i am going to stick with my story and say it needs violence ! so, back to my plan, get your screwdrivers in and rock the trans output shaft back and forth with a socket on a long breaker bar. its 1 1/16, i think, that fits the shaft after the U joint is off. back and forth and then POP i think is what you'll get
|