Thread: Gear ratio
View Single Post
Old 11-12-2019, 12:00 PM   #7
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Gear ratio

Quote:
Originally Posted by wmws View Post
All good advice above. Just to give you some figures.
A standard 3.78 rear at 2000 RPM = 46 MPH
A 3.78 rear with a 26% Mitchell OD at 2000 RPM = 58 MPH
A 3.54 with no OD at 2000 RPM = 49 MPH
A 3.24 with no OD at 2000 RPM = 53 MPH
I have the Mitchell and am happy with it. A little spendy but relatively easy to install.
wmws - That's great info. Thanks for posting it. Perhaps I missed this info before, but do not remember seeing this comparison when researching 2 years ago when figuring out what to do. With the 4.11 I could not comfortably keep up with my club at 40 mph.
30 Closed Cab PU is offline   Reply With Quote