The Ford Barn - View Single Post

19Fordy · 08-01-2019, 05:45 PM

You have to remove the shift arms from the side of the transmission and replace the originals seals located right behind the shift arms, Part # 01A-7288.The arms are pinned in place so you have to drive out the pins. Make sure your transmission is in "neutral" when you do this. It can be a tedious process as there is not a lot of working room. Original seals were leather. New seals are rubber.

08-01-2019, 05:45 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,944	Re: Leaking transmission 47 monarch You have to remove the shift arms from the side of the transmission and replace the originals seals located right behind the shift arms, Part # 01A-7288.The arms are pinned in place so you have to drive out the pins. Make sure your transmission is in "neutral" when you do this. It can be a tedious process as there is not a lot of working room. Original seals were leather. New seals are rubber.