Quote:
Originally Posted by CB919ER
I wasn't going to put grease in the steering box, I had planned to put use a semi-synthetic gear oil it, and use grease everywhere I saw a grease fitting.
|
Cornhead grease will not harden up like the grease used on fittings.
That’s why it can be used on the u-joint and steering box. It is self leveling and will also help in not being as likely to run out.
It is the correct viscosity needed.
This is not my first rodeo, please take my word on this one.
Also u-joint might take a full tube, 14 oz. Remove speedometer gear housing, two nuts, when grease starts coming out, your good to go. Enjoy.