Thread: OD power
View Single Post
Old 06-10-2019, 10:50 PM   #5
TerryH
Senior Member
 
TerryH's Avatar
 
Join Date: May 2010
Location: Fountain Valley, Calif.
Posts: 937
Default Re: OD power

As others said it sounds like you must have 4.11 rear axle ratio, and at that speed you are already well past the power peak. I also have a Mitchell 26% OD, and I usually shift into 3rd OD at about 45 mph, and on somewhat level ground, it does accelerate decently up to 65 or so. I have the standard 3.78 rear end and also the Snyder 5.5 head. Even with the OD I prefer to cruise at 60 mph most of the time.
TerryH is offline   Reply With Quote