View Single Post
Old 08-11-2017, 04:24 PM   #7
Cape Codder
Senior Member
 
Cape Codder's Avatar
 
Join Date: May 2010
Posts: 1,262
Default Re: Brake Adjuster Frozen

Today we checked the Adjuster again and looks just like it did when we put it in NEW approx. 10 months ago and YES the threads are good. Also checked the TWO brake adjusting shafts and found neither binding. Also when putting back together we found the LONG return spring VERY springy (if there is such a word) or hard to install so we considered that good also. As to the shoes too tight, this was not the problem, they were actually too LOOSE. The reason that we got into this is that the drum was really HOT when returning from Gettysburg BUT could not turn this adjuster COUNTER clockwise, although it was determined that the drum / tire were not dragging so we continued the return trip. I will not be working on it again until possibly Monday so I will let everyone know the outcome. So far we have not found ANYTHING wrong! I hope that explains everything BUT I guess some / all of you are shaking your heads. I know I am because I have NEVER seen this happen!
Cape Codder is offline   Reply With Quote