View Single Post
Old 12-26-2011, 10:52 PM   #14
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Timing the model a....

I've never had a problem feeling the dimple while pushing the timing pin in and hand cranking the motor. Most of the time I do it with the plugs in place, but as Glenn mentioned it sure makes it a lot easier to crank over with the plugs out. I press the pin in with my left hand while I pull on the hand crank with my right hand.
Tom Wesenberg is offline   Reply With Quote