The Ford Barn - View Single Post

neds29 · 03-25-2020, 01:30 PM

I'm in the process of rebuilding the front brakes of my '29 ccpu. I have the king pins out and the old roller type (yes roller) thrust bearings are probably not reusable. I still have an unused kit from my old roadster in 1971, and the ball- thrust bearings are actually marked Made in the USA, but don't have a manufacturer or number on them, so I'm leery about using them. Has anybody considered sourcing Boston Gear parts as in the following?

https://www.bostongear.com/-/media/F..._bearings.ashx

Update: The address above doesn't seem to work, but (I think) it's page 194 of the Boston gear catalog.

Thanks for any info,

Ned

03-25-2020, 01:30 PM	#1
neds29 Senior Member Join Date: Nov 2013 Location: Ahwatukee, AZ Posts: 115	Thrust bearings from Boston Gear? I'm in the process of rebuilding the front brakes of my '29 ccpu. I have the king pins out and the old roller type (yes roller) thrust bearings are probably not reusable. I still have an unused kit from my old roadster in 1971, and the ball- thrust bearings are actually marked Made in the USA, but don't have a manufacturer or number on them, so I'm leery about using them. Has anybody considered sourcing Boston Gear parts as in the following? https://www.bostongear.com/-/media/F..._bearings.ashx Update: The address above doesn't seem to work, but (I think) it's page 194 of the Boston gear catalog. Thanks for any info, Ned __________________ Retired civil engineer. Winters in Phoenix, summers in Ipswich, Mass. and North Dakota. '29 closed cab pickup- Excellent AZ truck. '29 roadster- Owned for 21 years but now sold. '28 CC pickup- My first car in Andover, MA back in '62- '63. Last edited by neds29; 03-25-2020 at 01:35 PM. Reason: address info