View Single Post
Old 06-30-2013, 05:58 PM   #7
Larry Seemann
Senior Member
 
Join Date: May 2010
Location: Spokane, WA.
Posts: 496
Default Re: fiber timing gear

There is a big nut that holds the cam gear onto the cam shaft. It takes a special wrench that few people own to tighten it properly so you see a lot of those nuts with cold chisel marks on them and a lot of those nuts aren't tight and the gear acts like yours - kind of wiggles around. Unfortunately you'll have to remove the timing gear cover to tighten it.
__________________
Larry Seemann
Larry Seemann is offline   Reply With Quote