View Single Post
Old 06-30-2013, 05:13 PM   #4
larrys40
Senior Member
 
Join Date: May 2010
Location: St Charles , Missouri
Posts: 1,675
Default Re: fiber timing gear

It sounds like it's moving for and aft... (front to back) correct? if so then replace the front timing gear spring and camshaft plunger. A little grease on the plunger before replacing the cover is recommended. Of course a skim of RTV on a new cover gasket and mating surface of the oil pan gasket.
Larry
larrys40 is offline   Reply With Quote