View Single Post
Old 08-29-2019, 11:04 PM   #11
Tudortomnz
Senior Member
 
Tudortomnz's Avatar
 
Join Date: May 2010
Location: Canterbury, New Zealand
Posts: 1,175
Default Re: Steering column bracket

Quote:
Originally Posted by Synchro909 View Post
I've had good success by simply using a later style bracket (that mounts to the dash) to take the load off the bracket on the tank and some of that "slosh sealer". I've never welded or resoldered one not had one leak again.
BTW, RHD support brackets are not available from the vendors. I belive they were used in 1931. As far as I know, no Model As came to this country in 1931.
Ford Aust. did produce & sell Model A's in 1931 & 1932, it is just that they were 1930 models. They would have had enough inventory due to low sales that there was no need to use the '31 parts, although I believe some '31 engine numbers are recorded.
Canada did have a RHD '31 column support, it was available here in NZ. My neighbour who had a late '30 still has a spare one but not cheap [$100 NZ].
Cheers. -Tom
Tudortomnz is online now   Reply With Quote