View Single Post
Old 08-13-2019, 11:12 PM   #5
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 474
Default Re: Water pump with no grease fittings

Here is an interesting one: I dug out a regular old design one and blasted it and discovered it was not so regular either. It had casting marks originally, which US ones did not. It had A L stamped on top and I put two and two together that perhaps A&L made this other pump years ago.

At least that one is a little better than the other one: the packing nut was soldered on in addition to the threads and the front bushing had broke on the lower part so the shaft ground into the casting (could that even be fixed?) A bit. At least I am making progress!
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote