View Single Post
Old 05-09-2019, 05:46 PM   #3
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 4,412
Default Re: Steering column bracket

Quote:
Originally Posted by BRENT in 10-uh-C View Post
That is correct. The solder was used to seal the plate in case of weeping. The issue I find is most of the ones that are weeping have cracks radiating out from the rivet holes where the metal is fatigued. The correct way to repair it is to weld the cracks and the holes solid and re-drill. That way the steering column is rigid again. Lots of vibrations are transferred thru the column.
Wouldn't welding burn off the Terne plating inside the tank and leave it vulnerable to rust? What then?
__________________
Life's journey is best undertaken slowly.

Last edited by Synchro909; 05-10-2019 at 09:36 PM.
Synchro909 is offline   Reply With Quote