View Single Post
Old 10-11-2018, 10:58 AM   #15
Ernie Vitucci
Senior Member
Join Date: May 2016
Location: Scottsdale, Arizona
Posts: 274
Default Re: Terriable backfiring

Good Morning...A few more odd things to check would be the nuts on the back of your amp meter and the nuts on the back of your ignition switch if you have an after market switch instead of the original pop out. Another spot that can be a problem is the little fuse box on the side of the starter. The rivet can work lose and the connection can be lost and it will behave as if you are turning the ignition off and on. Just remove the little box and put things back like Henry had them for an hour or so and see if the problem goes away. Good Luck...Ernie in Arizona
Ernie Vitucci is offline   Reply With Quote