View Single Post
Old 01-02-2021, 04:52 PM   #3
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 10,347
Default Re: Frame - is it straight?

Clamp a string onto the front and the back of each frame rail and pull the string taunt. You will see really quickly if it is bent. Also check the measurements diagonally to verify that the measurement is the same in an 'X' pattern.

Plenty of information how to heat shrink a frame back to being straight here in the archives.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote