The Ford Barn - View Single Post

desotoguy · 07-03-2019, 04:05 PM

It could be the rubber seal between the hinge and header, some of the replacement seals are not formed correctly and will cause the condition you describe. Also chaeck that the screws holding the hinge are tight.

07-03-2019, 04:05 PM	#4
desotoguy Senior Member Join Date: Nov 2011 Location: Greenwood SC Posts: 294	Re: adjusting windshield in 30 coupe It could be the rubber seal between the hinge and header, some of the replacement seals are not formed correctly and will cause the condition you describe. Also chaeck that the screws holding the hinge are tight.