The Ford Barn - View Single Post

fredv · 10-28-2014, 06:51 AM

I didn't try to engage the pawl manually, as it seems to engage when I tested the solenoid.
I will definitely test the transmission on the bench with the solenoid energized to be sure that the OD is working properly, I hate doing 2 times the same job!
Could you detail how you check that? just turn the input shaft by hand I guess?

10-28-2014, 06:51 AM	#83
fredv Member Join Date: Feb 2012 Location: France Posts: 94	Re: R10 Overdrive Issue I didn't try to engage the pawl manually, as it seems to engage when I tested the solenoid. I will definitely test the transmission on the bench with the solenoid energized to be sure that the OD is working properly, I hate doing 2 times the same job! Could you detail how you check that? just turn the input shaft by hand I guess?