The Ford Barn - View Single Post

nick c · 03-12-2020, 08:33 AM

When I changed to a V8, 8N ford PP, I machined the PP from 63 lbs. down to 36 lbs. on a lathe and drilled and tapped the holes on a mill, so the new PP will fit.

03-12-2020, 08:33 AM	#5
nick c Senior Member Join Date: Aug 2010 Posts: 260	Re: New clutch: Judder from hell When I changed to a V8, 8N ford PP, I machined the PP from 63 lbs. down to 36 lbs. on a lathe and drilled and tapped the holes on a mill, so the new PP will fit.