The Ford Barn - View Single Post - Interchange? for 1957 3 speed>to full synchromesh?

darrell · 02-28-2021, 02:25 PM

i done this on a 57 many years ago.in 65 they changed their bolt pattern but the old holes are still there.im not sure about the 63 64 one but the later are 3 inches shorter.thats the biggest thing.if you use one from a small block 260 351 you need the grind 3/8 of the imput shaft.just small things.

02-28-2021, 02:25 PM	#4
darrell Senior Member Join Date: Dec 2010 Location: p.e.i. Posts: 1,060	Re: Interchange? for 1957 3 speed>to full synchromesh? i done this on a 57 many years ago.in 65 they changed their bolt pattern but the old holes are still there.im not sure about the 63 64 one but the later are 3 inches shorter.thats the biggest thing.if you use one from a small block 260 351 you need the grind 3/8 of the imput shaft.just small things.