The Ford Barn - View Single Post

31Abone · 08-12-2019, 12:23 AM

I did some looking today at 32 drag link and pitman arm ..arm is about 5-1/2" c-c and a bit more..problem as i see it is the clearance to bottom of frame if pitman is shortened..I think the pitman will have to be turned around to face out so the drag will clear bottom of frame..also the drag link will have to be cut and turned 180 degrees..this is going to take some study..

08-12-2019, 12:23 AM	#16
31Abone Senior Member Join Date: Apr 2013 Location: Big pine Ca 93513 Posts: 797	Re: 32 stock tudor shortened pitman arm I did some looking today at 32 drag link and pitman arm ..arm is about 5-1/2" c-c and a bit more..problem as i see it is the clearance to bottom of frame if pitman is shortened..I think the pitman will have to be turned around to face out so the drag will clear bottom of frame..also the drag link will have to be cut and turned 180 degrees..this is going to take some study..