View Single Post
Old 06-11-2015, 09:59 AM   #31
BILL WZOREK
Senior Member
 
BILL WZOREK's Avatar
 
Join Date: May 2010
Location: Florence Ma.
Posts: 2,404
Default Re: Final report on Blast cabinet Gloves

Original post date 08 / 25 /2012 today date 06 / 11 /2015 { dang close to 3 years }
The left glove finally gave out about 1 week ago / the only thing that we had to do is the stitching between the glove & sleeve gave out my daughter re sewed it 1st time with a straight stich it then failed in a short time / 2 nd time went with a zig zag stitch it lasted till the thumb wore out.
Lee ( My wife & head sand blaster ) used electric tape to patch it & when it failed she told me to order a new one that is why the 1 week failure to order time line / this time we will zig zag stitch the seam before using > Most of you don't use the blaster as much as we do 6 to 7 day a week most of this time a little less lately / so they will last you a lot longer then ours.

NICE to get a great product >>>
BILL WZOREK is offline   Reply With Quote