The Ford Barn - View Single Post

oldandtired · 08-05-2019, 04:55 AM

The very first picture showing all of the caps has a stack of 3 wide caps on the far right and two to the left, one of which is in the top picture asking for identification. On the far right stack, the V8 appears to be raised which would make them 37 and not 36. The top picture used for identification is from the second stack that had 2 caps, and I cannot quite tell if the V8 is raised. I have a set of the ones on the far right that I bought maybe 20 years ago up in Belleville. Someone spent a lot of money and had them chromed. I do not think they are OEM Ford, but I could be wrong. The OEM Ford 37 hubcaps I am more familiar with have a pressed on stainless center on a steel hubcap.

08-05-2019, 04:55 AM	#4
oldandtired Senior Member Join Date: May 2010 Location: Edgefield, SC Posts: 811	Re: Hub cap identification The very first picture showing all of the caps has a stack of 3 wide caps on the far right and two to the left, one of which is in the top picture asking for identification. On the far right stack, the V8 appears to be raised which would make them 37 and not 36. The top picture used for identification is from the second stack that had 2 caps, and I cannot quite tell if the V8 is raised. I have a set of the ones on the far right that I bought maybe 20 years ago up in Belleville. Someone spent a lot of money and had them chromed. I do not think they are OEM Ford, but I could be wrong. The OEM Ford 37 hubcaps I am more familiar with have a pressed on stainless center on a steel hubcap.