Quote:
Originally Posted by 19Fordy
Bubba, Thanks for the reply. When I use the Beru 3.3 ohm coil (with no resistor) the problem still happens. I have good grounds and the mallory 605 module test shows that it's good. Car starts with a toich of the button and runs fine for about 1/2 mile, then dies.
Restarts instantly and problem is repeated. Maybe, my problem lies elsewhere.
I sure do thank all the folks who have replied to my request for help.
|
Then the circuit in the module is hurt, being on overload for all that time . You need to replace the module..
Replace module and coil together for another few years of good driving......
https://www.summitracing.com/parts/maa-6100m