[KULTULZ]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Dana Barlow

Size's space in pump checks out. I'm shocked they don't show inter 4 tip wear too outer ring.

Wounder who the art guy was that must of had a foggy photo to do his art with=he drew the feeler gage in the rubber O-ring,instead of between pump housing an outer ring/so that's a little funny.

I think if you look closely, the type of feeler gauge being used is a tappet adjusting type with a bent blade so as not to intrude so far.

If you look at the oiling system, you will notice once the oil leaves the filter, its first oiling point is the cam bearings and then onto the mains.



You would suspect the cam bearings first. Have you removed the rocker covers to see if both banks rocker rm assemblies are getting oil?

The oil pan and/or pickup screen may also be partially blocked causing poor oil pickup. There may also be an air leak(s) (suction) somewhere in the pickup tube.