Re: Flow testing a carb
You are basically setting it up to see how many units flow over time... just like when building an airplane. You are wanting to see if it is flowing enough for the motor.
I saw a Youtube video about it once(so you might try to find that) but however you rig it up, you run fuel through the full throttle carb and collect the results over a certain time. Not too technical. This will not measure possible resistance of the shutoff and gascolator unless included in the test. Do remember that you should set the fuel supply at a level over the carb that is the same as the tank outlet is over the carb while in the car. Better yet, do it in the car.
D
|