Thread: How to remove drum & hub from the type with the hub flange is OUTSIDE of the drum?
View Single Post
Old 07-16-2019, 02:06 PM   #8
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,177
Default Re: How to remove drum & hub from the type with the hub flange is OUTSIDE of the drum
Quote:
Originally Posted by Andy View Post
The swedged material is real soft. It had to be so it could be swedged. A mild steel 5/8 deep hole saw works just fine.
Thanks, Andy. So, if I'm understanding correctly, use the 5/8" hole saw to drill around the stud. Once free, use the modern studs with the knurled shafts?
Tim Ayers is offline   Reply With Quote