Thread: Grinding gears
View Single Post
Old 10-10-2018, 11:12 PM   #4
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
Default Re: Grinding gears

Check to see if the clutch arm is cracked. No, the input shift should stop within a very short time of pressing the clutch. Adjust the clutch for 1 inch freeplay.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote