The Ford Barn - View Single Post - Zinc spray coatings for running board trim

Tinbasher · 06-23-2018, 08:58 AM

You could try a bit of Grey Scotch-Brite pad and some Auto-Sol metal polish on them. If there Zinc it should bring them back. The more you polish the brighter they will get so you can control the look with the polishing.

Hope this helps.

06-23-2018, 08:58 AM	#7
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,174	Re: Zinc spray coatings for running board trim You could try a bit of Grey Scotch-Brite pad and some Auto-Sol metal polish on them. If there Zinc it should bring them back. The more you polish the brighter they will get so you can control the look with the polishing. Hope this helps.