View Single Post
Old 07-11-2018, 09:56 PM   #4
Senior Member
eagle's Avatar
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 1,368
Default Re: Coil has constant power

Turn on the ignition switch, as you slowly turn the engine over with the crank, the point side of the coil should go to ground. If its not, check points/ignition switch/etc. Easy to trace with a voltmeter.
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote