Thread: "Gener-Nator"?
View Single Post
Old 07-11-2018, 02:53 PM   #11
pgerhardt
Senior Member
 
pgerhardt's Avatar
 
Join Date: Jul 2014
Location: Danbury Ct
Posts: 1,240
Default Re: "Gener-Nator"?

Quote:
Originally Posted by Y-Blockhead View Post
I used a longer belt, not a problem...

Are your wires connected properly? My wires connect to the lug on the front side of the "Fake cutout" per instructions.


Can you tell me the part number for the belt that worked for you? When I used a longer belt (the stock one) the Powermaster pulley rubbed against the lower radiator hose.

On the model A generator the power output terminal is near the front of the generator. the power passes through the cutout and your wires are connected toward the back of the generator (picture 1). To get a similar look I mounted a nice ford script cutout backwards on the Powermaster. (picture 2) No current passes through the cutout. It comes out of the power output terminal (near the rear of the Powermaster) and to my wiring. Most never realize it is backwards!
Attached Images
File Type: jpg Screen Shot 2018-07-11 at 3.39.37 PM.jpg (50.2 KB, 32 views)
File Type: jpg IMG_3581.jpg (38.6 KB, 32 views)
pgerhardt is offline   Reply With Quote