View Single Post
Old 07-11-2018, 04:01 AM   #11
Benson
Senior Member
 
Benson's Avatar
 
Join Date: May 2010
Posts: 1,793
Default Re: Engine removal question

Good idea to remove the throttle linkage from rear of engine so that it does not get all bent up as they often do.

Many times it takes hours of messing around to get the linkage to work again!

Often the two 0.010 thick shims from upper flywheel cover bolts get lost in the process so good idea to check that they do not drop off and get lost.

Last edited by Benson; 07-11-2018 at 03:48 PM.
Benson is offline   Reply With Quote