View Single Post
Old 07-10-2018, 06:37 PM   #10
dpson
Senior Member
 
dpson's Avatar
 
Join Date: Apr 2014
Location: Montpelier, VT
Posts: 140
Default Re: Engine removal question

I decided to remove the headlight bar, the idea of lifting the engine high enough to go over it didn't appeal to me, getting the mounting bolts out thru the fender brackets was a PIA, however the worst part was undoing the headlight wires which the previous owner had connected with crimped wire splices, had no choice but to cut the wires. Waiting for help to lift the hood off next. Most everything else is disconnected and out of the way.

I'm pulling the engine only, not the tranny. Will keep you posted, thanks for the advice.
dpson is offline   Reply With Quote