Thread: Motor won't run
View Single Post
Old 06-12-2018, 09:18 AM   #27
Senior Member
eagle's Avatar
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 1,366
Default Re: Motor won't run

I would take a fresh look at everything. Timing looks good per pics, check compression in each cylinder with a compression tester, just takes a few minutes and gives you a ton of info. Lift the spark plug wires a 1/4 inch and crank it to check for nice hot spark, put your hand over air intake and crank to see if gas is there. If all this tests out, it should run.
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote