Thread: Motor won't run
View Single Post
Old 06-11-2018, 03:36 PM   #19
Senior Member
Benson's Avatar
Join Date: May 2010
Posts: 1,752
Default Re: Motor won't run

After re reading other posts I see that you have spark so this info is not needed ...

Is this nut OR any tabs, lugs or wires attached to it below touching or very close to the dist casting?

Can not post photo with arrow pointing to part ...

Referring to photo in post 16 with orange wire.

Talking about the NUT under the brass part of the rotor ....

Last edited by Benson; 06-11-2018 at 11:30 PM.
Benson is offline   Reply With Quote