View Single Post
Old 09-12-2017, 11:05 PM   #5
Chuck Sea/Tac
Senior Member
Chuck Sea/Tac's Avatar
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 1,684
Default Re: Retrive Starter Bendix Bolts

I did similar to 160B . I used an old length of drain augar, with a small magnet epoxied to the end. As he said, go through the starter hole, and you'll have the head and washer out, in a couple of try's.
Chuck Sea/Tac is offline   Reply With Quote